الصفحة الرئيسية> قائمة المنتجات> نظام البولي يوريثان لحذاء نعل> نظام البولي يوريثان لأحذية ليدي وحيد المواد الخام راتنجات البوليستر بو المواد الصلبة> Pu for Lady's Shoe Light Wight Highress
Pu for Lady's Shoe Light Wight Highress
Pu for Lady's Shoe Light Wight Highress
Pu for Lady's Shoe Light Wight Highress
Pu for Lady's Shoe Light Wight Highress
Pu for Lady's Shoe Light Wight Highress
Pu for Lady's Shoe Light Wight Highress

Pu for Lady's Shoe Light Wight Highress

أحصل على آخر سعر
الدفع نوع:L/C,T/T,D/P
إنكوترم:FOB,CFR,CIF
أدني كمية الطلب:1000 Kilogram
نقل:Ocean
ميناء:Shanghai
سمات المنتج

نموذجXC-9080W/XC-6088W

علامة تجاريةXuchuan

مكان المنشأالصين

انواع منالراتنج الصناعي والبلاستيك

ChemicalPU

Keywordsflexible polyurethane resin

CharacteristicLow density and high hardness, good appearance, little pinhole, and weak foam line

ApplicationOutsole, slippers, wedge shoes

CodeXC-9080W/XC-6088W

BrandXUCHUAN

التعبئة والتغليف والت...
بيع الوحدات : Kilogram
نوع الحزمة : 20 و 225 كجم/طبل
مثال الصورة :
وصف المنتج

وصف المنتج

نعل حذاء المرأة

البوليول والإيزوسيانات راتنج البولي يوريثان المرن من أجل حذاء نعل

منخفضة الكثافة والصلابة العالية ، المظهر الجيد ، ثقب صغير ، وخط رغوة ضعيف


راتنج البوليستر المواد الخام

تفاصيل المنتج

Application shoe sole
Keywords flexible polyurethane resin
A/B Materials Temperatures(℃) A/B Materials Temperatures(℃)
A+C/B Mix ratio (By weight) 100/100~102
Cream Time (s) 6~8
End of Rise Time (s) 30~40
Free Rise Foam Density(g/cm3) 0.21~0.26
Mold Temperature(℃) 45~55
Demold Time(min) Demold Time(min)
Molded Density (g/cm3) 0.35~0.60

Characteristic: Low density and high hardness, good appearance, little pinhole, and weak foam line

Application: Outsole, slippers, wedge shoes

Typical properties of PU matrix

Name of products

Appearance

Viscosity (mPa·s/40)

Density (g·cm-3/40)

Package(kg)

/

/

/

A-9080W

Cream,White,liquid

1000~1300

1.01~1.02

18

/

/

/

B-6088

Yellowish transparent liquid or waxy

600~800

1.08~1.2

20

/

/

/

Materials preheat

A-9080W:  preheated at 50~60 for 6~8 hours.

B-6088:    preheated at 50~60 for 6~8 hours.

Typical processing parameters & Reaction parameter.

Items

A/B Materials Temperatures()

A+C/B Mix ratio
(By weight)

Cream Time (s)

End of Rise Time (s)

Free Rise Foam Density(g/cm3)

Mold Temperature()

Demold Time(min)

Parameter

40~45/38~42

100/100~102

6~8

30~40

0.21~0.26

45~55

5~7

The adding content of C-2 should be 210g±10g/18kg.

The adding content of water should be 0~80g/18kg according to the reality.

The adding content of hardener should be 0~1200g/18kg according to the reality.

Physical properties

Items

Molded Density (g/cm3)

Hardness
(Shore A )

Tensile strength
(MPa)

Elongation
(%)

Tear Strength
(kN/m)

Williams abrasion
(cc/php)

/

Physical  properties

0.35~0.60

60~88

4~7

200~300

11~20

130~200

/

Demold time may be prolonged with the increase of sole thickness.

These physical data are acquired by testing a sample of 6mm thick.

Data listed above are just for reference. The detail data are subjected to practical production. If other requests for physical properties, please contact us.

مو المواد الصلبة


ملف الشركة

عملية الإنتاج
شهادة
التغليف والشحن
التعليمات

اتصل بنا
منتوجات جديدة
ارسل السؤال
*
*

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

إرسال